FAQ

5 | Page
6. Press SET to confirm and move to the year. The
YEAR
will show.
2018
will flash. Press the + or - button to
change the year.
7. Press SET to confirm and move to the month. The
MONTH
will show. Month number will flash. Press the + or -
button to change the month.
8. Press SET to confirm and move to the date.
DATE
will show. Date number will flash. Press the + or - button to
change the date.
9. Press SET to confirm and move to Month/Date or Date/Month format.
M-DATE
will flash. Press the + or - button
to change to DATE-M.
10. Press SET to confirm and move to the temperature unit.
TEMP °F
will show. ̊F will flash. Press the + or - button
if you prefer °C (Celsius).
11. Press SET to confirm and exit.
WEEKDAY: HOW DO I CORRECT THE DAY OF THE WEEK?
• The day of the week will set when the Year, Month, and Date are set. If your day of the week is incorrect, yet
the month and date are correct, please go the program menu and check the YEAR setting.
DOES THIS STATION HAVE 12 HOUR AND 24 HOUR TIME OPTIONS?
• Yes, you can select 12 hour or 24 hour time format in the program menu of your station.
ALARM
SET ALARM
1. Hold the
ALARM
button 3 seconds to enter settings mode.
2. Press the
+
or
-
button to adjust the flashing values.
3. Hold the
+
or
-
buttons to adjust quickly.
4. Press the
ALARM
button to confirm adjustments and move to the next item or exit.
Note:
Alarm is crescendo sound. When the alarm sounds, it continues for 2 minute and then shuts off completely.
ACTIVATE/DEACTIVATE ALARM
• The alarm is active when set.
• From normal time display, press and release the ALARM button to deactivate or activate the alarm. The alarm
time will show for 2 seconds.
• Alarm icon (bell) and ALARM ON will show then active
• ALARM OFF will show when inactive.
SNOOZE ALARM
• When alarm sounds, press the ALARM button to silence alarm for 10 minutes.
• The alarm icon will flash
• Press any button except ALARM to silence the alarm for 24 hours