Installation Guide

ManualsBrandsLa Crosse Technology ManualsGarden CenterDigital Wireless Color Weather Station with Mold Indicator in Black

Wireless Color Weather Station

Model: 308-1414MB

DC:112417

POWER UP

1. Insert 2-AA batteries into your sensor.

2. Insert the 5.0 volt power cord into an outlet, then into your station.

3. Optional: Install 3-AAA batteries into your station.

4. Once the sensor is reading to your station, place sensor outside

in a shaded location.

Watch sensor mounting video: http://bit.ly/TH_SensorMounting

· The station will search for Atomic time signal after the power cord or

batteries are installed.

· Press and release the TIME SET button at anytime to start or stop a

manual search for the atomic time signal.

· For information about WWVB Atomic time visit: http://bit.ly/AtomicTime

SETTINGS

ATOMIC TIME SIGNAL

• Press the HEAT/DEW button once to view remote Heat Index.

• Press the HEAT/DEW button twice to view remote Dew Point.

• Press the HEAT/DEW button a third time to view indoor and

remote Mold Risk (0, LOW, MED, HI)

· Hold the TIME SET button to enter set mode.

· Use the ARROW buttons to adjust and TIME SET to confirm.

WWVB ON/OFF

Time Zone

DST ON/OFF

12/24 Hour

Hour

Minutes

Year

Month

Date

Fahrenheit/Celsius

10.

Time Zones

AST = Atlantic

EST = Eastern

CST = Central

MST = Mountain

PST = Paciﬁc

AKT = Alaska

HAT = Hawaii

Note: When WWVB OFF is selected, the

menu will move directly to 12/24 hour

time setting.

Note: Weekday sets automatically when

year, month and date are set.

OTHER BUTTON FUNCTIONS

Press SNOOZE/LIGHT (HI-LOW-OFF): Adjust or turn off

your backlight.

Hold ALERT: To set high and low temperature alerts. Use

the ARROW buttons to adjust. Press ALERT to confirm.

Press ALERT: Press to toggle between alerts. Press the UP

ARROW button to arm alert. Press the DOWN ARROW button

to disarm alert.

Hold ALARM: Set alarm time. Use the ARROW buttons to

adjust. Press ALARM button to confirm.

Press SNOOZE/LIGHT (HI-LOW-OFF): Press SNOOZE (when

alarm sounds): To silence alarm for 10 minutes.

Press ALARM: Once to view alarm time. Press again to activate

or deactivate time alarm.

Press TIME SET: Start or stop WWVB search.

Press HEAT/DEW: View Heat Index | Dew Point | Mold Risk

Hold HEAT/DEW: Search for sensor

Press DOWN ARROW: Press and release to view indoor/remote

minimum readings.

Press UP ARROW: Press and release to view indoor/remote

maximum readings.

Page | 2 Page | 3 Page | 4

AAA

HEAT INDEX | DEW POINT | MOLD RISK

Summary of content (2 pages)

PAGE 1
SETTINGS POWER UP 1. Insert 2-AA batteries into your sensor. Wireless Color Weather Station 2. Insert the 5.0 volt power cord into an outlet, then into your station. 3. Optional: Install 3-AAA batteries into your station. 4. Once the sensor is reading to your station, place sensor outside in a shaded location. Watch sensor mounting video: http://bit.ly/TH_SensorMounting AAA AAA AAA · · OTHER BUTTON FUNCTIONS Hold the TIME SET button to enter set mode.
PAGE 2
WARRAN T Y I N F O WEAT H E R F O R ECAST IC O N S W E’ R E H ER E TO H EL P! The unit predicts weather condition of the next 12-hours based on the change of atmospheric pressure. The weather forecast is about 70-75% correct. F I N D F U L L M A N UA L S, FAQS, A N D M OR E U N D E R THE SU P P O RT TA B HE R E : http://bit.ly/308-1414mb La Crosse Technology, Ltd.