Full Product Manual

WIRELESS WEATHER STATION WITH THREE SENSORS
8 | PAGE
If you require additional support, call or customer support team based out of La Crosse, Wisconsin.
Phone: [phone]
Or fill out our online support request form here: bit.ly/contact_techsupport
Our knowledgeable support team is available: Monday-Friday, 8am-6pm CST
Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!
WE’RE HERE TO HELP!
JOIN THE CONVERSATION
CARE AND MAINTENANCE
• Do not mix old and new batteries.
• Do not mix Alkaline, Standard, Lithium, or Rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed with correct polarity (+ and -).
• Remove batteries from equipment which is not to be used for an extended period of time.
• Promptly remove expired batteries.
Sensors Outside:
• Mount the TX141TH-BCHv3 sensors on a north-facing wall or in any well shaded area. Under an eave or
deck rail is preferred.
• The maximum wireless transmission range to the weather station is over 330 feet (100 meters) in open air,
not including walls or floors.
• Be sure the sensor is mounted vertically
Option 1:
• Install one mounting screw into a wall leaving some extended.
• Place the transmitter onto the screw.
• Gently pull the transmitter down to lock the screw into place.
Option 2:
• Insert the mounting screw through the front of the transmitter and into the wall.
• Tighten the screw to snug (do not over tighten).
Sensors Inside:
• Wall mount or stand in desired location.
• Avoid placing in sunlight, or near vents which could cause inaccurate readings.
POSITION SENSORS