FAQ

La Crosse Technology, Ltd. Page 7
 Temperature stations that sit in the sunlight can develop a cloudy film over time.
 This is generally a power related issue.
 Batteries
may be overpowered or underpowered. Remove batteries from temperature
station.
 Press any button 20 times. Leave the temperature station unpowered for 1-2 hours.
 Install fresh alkaline batteries with correct polarity.
Temperature station Has Distorted Display
 On a brand new temperature station, check for thin plastic films of printed scratch guard that
may be on the upper and lower screen of the temperature station. This thin piece of plastic
has printed numbers for store displays.
 This film will be easy to peel off the LCD.
 With all power removed the temperature station should be blank.
 If numbers still appear, please check for scratch guard.
 Check that the batteries are installed correctly.
 This is generally a power related issue.
 Batteries
may be overpowered or underpowered. Remove batteries from the temperature
station.
 Press any button 20 times. Leave the batteries out of the display for 2 hours.
 Insert fresh alkaline batteries into the temperature station.
Temperature station is Blank: No Letters, Numbers or Dashed Lines
 Check that the batteries are installed correctly.
 Batteries
may be overpowered or underpowered. Remove batteries from temperature
station.
 Press any button 20 times. Leave the batteries out of the display for 2 hours.
 Insert fresh alkaline batteries into the temperature station.