FAQ

La Crosse Technology, Ltd. Page 3
• Date
• Month/Date or Date/Month format
• Fahrenheit / Celsius
SETTINGS:
1. Hold SETTINGS button. The 12Hr will flash Press the + | HISTORY button to choose 24
hour time format.
2. Press SETTINGS to confirm and move to the hour. The HOUR will flash. Press the
+ | HISTORY button to choose the hour.
3. Press SETTINGS to confirm and move to the minutes. The MINUTES will flash. Press
the + | HISTORY button to choose the minutes.
4. Press SETTINGS to confirm and move to the year. 2020 will flash. Press the
+ | HISTORY button to change the year.
5. Press SETTINGS to confirm and move to the month. The MONTH number will flash.
Press the + | HISTORY button to change the month.
6. Press SETTINGS to confirm and move to the date. DATE number will flash. Press the
+ | HISTORY button to change the date.
7. Press SETTINGS to confirm and move to Month/Date or Date/Month format. MM/DD
will flash. Press the + | HISTORY button to change to DD/MM.
8. Press SETTINGS to confirm and move to the temperature unit. °F will flash. Press the
9. + | HISTORY button if you prefer °C (Celsius).
10. Press SETTINGS to confirm and exit.
Note: If no buttons are pressed in a 10 seconds period, set mode will time out and return
to live display mode, reflecting whatever adjustments were made by user before timed out
INDOOR COMFORT INDICATOR
The Indoor Comfort Indicator is based on the Indoor Humidity. The arrow will indicate
comfort level.
Too Dry
1% to 25%
Dry
26% to 39%
Comfort
40% to 75%
Wet
76% to 83%
Too Wet
84% to 99%
INDOOR COMFORT METER IS BLANK: NO LETTERS, NUMBERS OR DASHED LINES
• Check that the batteries connect correctly.
• Batteries may be overpowered or underpowered.
• Remove batteries from the indoor comfort meter.
• Press any button 20 times. Leave the batteries out of the indoor comfort meter for 2
hours.