installation user_guide

INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
40
14. Final fitting and checks
Assemble the range
Installing the control knobs
The range is supplied with 5 burner control knobs. These are
for the gas controls to the left of the control panel (Fig. 14.1).
There are also 3 oven control knobs (Fig. 14.2).
Push the multi-function oven selector knob and temperature
knob on to the control spindles at the right-hand side of the
control panel.
Installing the handrail
Components (Fig. 14.3)
• 1x Hand rail tube
• 2x End cap with Allen fixing screw
• 2x Plastic friction cup
Hold a friction cup by the tabs on one end of the tube (Fig.
14.4).
Line up one of the end caps to the tube and push it on the
tube over the friction cup (Fig. 14.5).
Turn the tube over and push on the other end cap using the
second friction cup, making sure that you DO NOT scratch or
damage the rst end piece and conrm the two end pieces
are lined up correctly.
The Allen screws should be on the underside (Fig. 14.6).
Installing the door handle
Attach the door knob to the door knob base and screw it to
the mounting on the oven door. Hand tighten only – DO NOT
use any tools (Fig. 14.7).
Installing the toe kick
Remove the 3 screws for the toe kick mounts along the
bottom front edge of the range. Fasten the toe kick using
these screws (alternative color screws can be found in the
loose parts pack).
Fitting the grates
Make sure that the grates are in the correct position and
sitting down (Fig. 14.8).
ArtNo.280-0045 Burner Knob
ArtNo.280-0053 Door Knob Screw to Door
ArtNo.280-0047 Oven Knob
Fig. 14.1 Fig. 14.2
Fig. 14.3
Fig. 14.4
Fig. 14.5
Fig. 14.6
Fig. 14.7
ArtNo280-0084 DF Pan Supports
Fig. 14.8