installation user_guide
INSTALLATION 
Check the appliance is electrically safe when you have nished.
22
Converting to propane gas
This appliance is supplied set for natural gas. 
A conversion kit for Propane gas is supplied with the range. 
The conversion must be performed by a qualied LP gas 
installer. See the ‘Conversion’ section at the back of this 
installation manual for more details. 
n
For installation 5000 ft above sea level, the 
appliance must be converted using high altitude kit 
A065744. Contact your distributor. 
Location of the range
The range may be installed in a kitchen/kitchen dining area 
but NOT in a room containing a bath or shower. 
The range is freestanding and should not be placed on a 
separate base. 
DO NOT Any openings beneath the range or behind the 
range should be sealed. 
The range should be positioned on a solid substrate. 
n
Your range is heavy DO NOT place on soft oor 
coverings, such as cushioned vinyl or carpeting. 
Use care when moving the range on cushioned vinyl or 
carpeted ooring.
When the oor covering ends at the front of the range, the 
area that the range will rest on should be built up to the same 
level or higher than the oor covering. 
n
 Also, make sure your oor covering will withstand 
180°F. (See the Installation Safety Instructions 
section). 
n
(See the Installation Safety Instructions section). 










