User Manual

Marine Systems
Aviation Recorders
Rev. 06
Mar . 16/11
165M0014-10
Page 2--13
2.1.4.4 Vessel/Voyage Setup
The Vessel/Voyage Setup screen (Figure 2-- 7) allows the user to enter the following
information, which is required to be completed during the installation of the AIS.
MMSI: Maritime Mobile Service ID: Maximum nine numbers.
N: Navigational Status:
UNDFND Undefined
UNDERWAY Underway Using Engine
NOCOMMAND Not Under Command
RESTRICTD Restricted Maneuverability
C --DRAUGHT Constrained by Draught
MOORED Moored
AGROUND Aground
FISHING Engaged in Fishing
SAILING Underway sailing
Res. HSC Res. HSC
Res. WIG Res. WIG
IMO#: IMO Number: Official IMO designation ID for Vessel. 0 = default =
not available.
MaxD: Maximum Draft: Maximum draft in meters from 0.1 to 25.5m.
CSgn: Radio Call Sign: Maximum seven characters.
ShType: Vessel Type: (Refer to Table 2 --3.)
Name: Vessel Name: Any 20 alphanumeric characters.
DEST: Destination. The current destination of this voyage.
PoB: People on Board. The number of persons currently on board the
vessel.
ETA: Estimated Time of Arrival
To enter vessel and voyage information, perform the following:
(1) Press FNC and then NAV to get to the AIS Main System Menu screen.
(Refer to Figure 2--4.)
(2) Use DOWN ARROW key to scroll down to Vessel Voyage Setup. Press ENT.
Use the following instructions to enter data for Steps (3) through (9). (Refer to
Figure 2--7.)
F Use the LEFT, RIGHT, UP, DOWN arrows to navigate between fields.
F Use the ENT key to select a field to enter.
F Use the alphanumeric keypad to enter the required data into the field.