User's Manual
Table Of Contents
- Cover
- 1-Welcome Letter
- 2-Table of Contents
- 3-Contacts
- 4-Quick Start Guide Rev 2
- 5-SIM Registration
- 6-Installation and Operations Rev 2
- 7-Component Maintenance Manual Rev 1
- SERVICE BULLETIN LIST
- RECORD OF CHANGES
- RECORD OF REVISIONS
- LIST OF EFFECTIVE PAGES
- LIST OF EFFECTIVE PAGES
- INTRODUCTION
- DESCRIPTION AND OPERATION
- TESTING AND TROUBLESHOOTING
- DISASSEMBLY
- CLEANING
- CHECK
- REPAIR
- ASSEMBLY
- FITS AND CLEARANCES
- SPECIAL TOOLS, FIXTURES AND EQUIPMENT
- ILLUSTRATED PARTS LIST
Airbus Iridium SATCOM System
165E5733-00 L-3 Aviation Recorders Proprietary
Issue, Rev. 02
21 January 2014
Page 71
Figure 7-15 – Software Upgrade Progress
Note:
Incompatible files will be rejected. The progress bars turn red, and an error message
displays next to the progress bars. Click Reset to restart the upgrade process.
If you uploaded an incorrect file, but have not yet clicked Apply, click Reset to restart the
upgrade process.
4. Click Apply to verify and load the software into non-volatile memory.
Blue progress bars indicate the status of the software file being installed on the SDU.
When the software verification is completed successfully, the progress bars turn green,
and the message displays that the system must be restarted for the changes to take
effect (see Figure 7-16).
Figure 7-16 – Software Loading Progress Screens
Note:
If the aircraft status changes to ‘In-Air’ at any time during the Upgrade process, the system
will reboot automatically and return to Operational Mode, disregarding any incomplete
upgrades.