User Manual

AFIRS 228S Iridium Global Communications System Installation Manual
16 July 2014 L-3 Aviation Recorders Proprietary Page 58
165E5733-00 Rev. 03
3. Click Upload.
Success
• The blue progress bars turn green.
• The uploaded data files display a CRC code.
• The uploaded software file displays the part number of the software.
Incomplete
• Non-compatible files will be rejected and an error message will display.
4. Click Apply to start the verification process.
Success
• The blue progress bars turn green.
Incomplete
• Non-compatible files will be rejected and an error message will display.
5. Click Reset in to upload another file.
6. Click Exit Maintenance Mode. The system must re-boot for changes to take effect.
Note:
If the aircraft’s status changes to “In-Air” before uploading is complete, the system will reboot
automatically and return to Operational Mode - disregarding incomplete uploads.
7. Maintenance User can modify only 5 ORT parameters:
a. Click ORT (Owner Requirements Table) to configure customized settings for specific
aircraft and or operator requirements.
8. Administrator User can modify any UAT parameter:
a. Click UAT (User Access Table) to configure user access privileges.
9. Click Exit Maintenance Mode. The system reboots and returns to Operational Mode.
Note:
If the aircraft’s status changes to “In-Air” before uploading is complete, the system will reboot
automatically and return to Operational Mode - disregarding incomplete uploads.