User Manual

Marine Systems
Aviation Recorders
Page 4--21
Initial Issue165M1161--00
Aug. 23/10
4.3.11. Enable or Disable the SART Relay Feature
When the “SART Relay Feature” is enabled, the AIS AtoN receives a SART mes-
sage and repeats the message at an established interval for a pre-- defined amount
of time. This feature overrides power saving settings.
To enable or disable SART transmissions, enter “a” in the main System Configura-
tion Menu, and the screen shown in Figure 4--16 appears. Press the “Space Bar” to
enable or disable the SART Relay feature. When the “Hit Any Key to Continue...”
message appears, press any key to return to the System Configuration Menu.
Figure 4--16. Enable o r Disable the SART Relay Feature
NOTE: This is a factory test that should remain disabled.