User Manual

Marine Systems
Aviation Recorders
Page 4--9
Initial Issue165M1161--00
Aug. 23/10
4.3.2. Set t h e MMSI
To set the MMSI, enter “2” in the main “System Configuration Menu,” and the option
to change the MMSI appears, as shown in Figure 4--5. Hit “M,” and the screen
shown in Figure 4--5 appears. If needed, change the MMSI, and press “Enter.” When
the “Hit Any Key to Continue...” message appears, press any key to return to the
main “System Configuration Menu.”
NOTE
: The MMSI is controlled by a competent authority and must be a
legitimate number. The factory default is “0.”
Figure 4--5. AtoN Configuration Screen