User Manual

• Default TTL. Time-to-live value used to determine how long a packet that has not reached its
destination will remain on the network prior to be discarded.
• Total datagrams received. Total number of IP data packets received.
• Datagrams with header errors. Total number of received IP data packets that contain errors in
the header (i.e., incorrect IP header length).
• Datagrams with address errors. Total number of received IP data packets that contain address
errors.
• Datagrams forwarded. Total number of IP data packets that are forwarded because the
receiving radio was not the intended destination.
• Datagrams with unknown protocols. Total number of data packets received with protocols not
recognized by the radio.
• Input datagrams discarded. Total number of IP data packets received which were discarded
because the node was too busy.
• Datagrams delivered. Total number of IP data packets successfully delivered to the destination
application.
• Datagrams sent. Total number of IP data packets sent.
• Output datagrams discarded. Total number of data packets sent which were discarded
because the node was too busy.
• Datagrams discarded due to no route. Total number of data packets discarded due to the lack
of correct routing information.
• Timeout value for reassembly queue. Duration before the reassembly queue is cleared and
the connection is dropped.
• Fragments received needing reassembly. Total number of received IP data packet fragments
that require reassembly. If a data packet cannot be sent in a single transmission, it will be broken
into fragments and then reassembled upon receipt.
• Datagrams successfully reassembled. Total number of fragmented IP data packets received
and reassembled.
• Fragment reassembly failures. Total number of fragmented IP data packets received that could
not be reassembled.
• Datagrams successfully fragmented. Total number of IP data packet fragments generated.
• Datagrams failing to fragment. Total number of data packets discarded because the
fragmentation process failed to fragment the packets.
• Fragments created. Total number of IP data packet fragments created.