User Manual

NovaRoam EH900 User Manual
V. 1.1
Page 69
Press the Find button. Any NovaRoams on the wired network will be displayed.
NovaRoams will be listed by MAC address, current IP address, and Netmask. To
select a NovaRoam from the list, click on the NovaRoam in the MAC address
column. After selecting a NovaRoam from the list, the IP address or Netmask can
be changed. Once selected, change the current IP address or Netmask to the
desired address or Netmask in the appropriate fields. Pressing the Update button
will commit the changes to the NovaRoam. After pressing the Update button, the
NovaRoam will reboot. Press the Close button to close NovaFind.
Note: In order to connect to a NovaRoam, the NovaRoam and computer must
have IP addresses that are from the same network. If you use NovaFind to
change the IP address of a NovaRoam, you still will not be able to connect if both
the NovaRoam and computer are not on the same network.
Note: NovaFind may not work on computers with more than one network
interface card. NovaFind can be made to work in this situation by temporarily
disabling the network card that is not connected to the NovaRoam.