User Manual

NovaRoam EH900 User Manual
V. 1.1
Page 62
Once the individual networks are established, it is recommended that you plan an
IP addressing scheme. In the example from Figure 37, each NovaRoam host ID
is 1, while the computer’s host ID is 2. Following a numbering scheme such as
this will make it easier to keep track of which IP addresses are used for each
device.
The wireless network in the example uses the 192.168.203.0 subnet. This subnet
is different than the subnets used for the Ethernet segments. The wireless
interface of the NovaRoam from Subnet 1 is assigned an address of
192.168.203.1. The wireless interface of the NovaRoam from Subnet 2 is
assigned an address of 192.168.203.2. The wireless interface of the NovaRoam
from Subnet 3 is assigned an address of 192.168.203.3.
You may find it helpful to draw a diagram as a planning aid when designing your
wireless network. Such a diagram will not only help in planning the networks, it
will act as a handy reference guide.