User Manual

NovaRoam EH900 User Manual
V. 1.1
Page 61
Appendix A: Example Network Plan
The use of private IP addresses is strongly recommended when configuring a
NovaRoam network. The following example of a NovaRoam network uses
several private IP subnets from the 192.168.0.0 block of private addresses.
The NovaRoam network depicted in Figure 37 contains three Ethernet segments.
The first segment uses the 192.168.200.0 Class C subnet, encompassing a
range of addresses from 192.168.200.1 to 192.168.200.254. The second
segment uses the 192.168.201.0 Class C subnet, encompassing a range of
addresses from 192.168.201.1 to 192.168.201.254. The third segment uses the
192.168.202.0 Class C subnet, encompassing a range of addresses from
192.168.202.1 to 192.168.202.254. All three segments share the 192.168.203.0
Class C subnet for their wireless interfaces. It is over this common subnet that
traffic is routed between Ethernet segments.
Figure 37: Multi-Network NovaRoam Example