User's Manual

PROGRAMMING INSTRUCTIONS
NOTE: The MODE dial must be in the PROGRAM position to set a schedule.
The LCD will display the currently scheduled program (default is all WATER
DAYS.) The SELECT + - keys will scroll the LCD display through each of the
scheduling positions WATER DAYS, ODD, EVEN, INTERVAL, and INTERVAL START DATE.
Be sure the PROGRAM dial is set on the program you want to change (A, B, or C)
and that you want to change the current schedule. A scheduling option is chosen
after you press a button, either SELECT or ADJUST. The old schedule is replaced
with the new one. It’s easy to program a schedule with the following
procedures.
Set Water Days Scheduling Option
Turn the large dial to the SCHEDULE position. Use the
SELECT +- till the raindrops appear above the days of the week. Press the ADJUST
+ button to select that day for watering or press ADJUST - for non-watering
days. A flashing t indicator appears over the day you’re about to set.
Raindrops appear over selected days to water. The t indicator automatically
moves one day to the right after an ADJUST + or - key press. Continue selecting
or deselecting the days you want the controller to water until you have your 7-
day calendar set.
NOTE: Programming a WATER DAYS schedule deletes any other schedule for the
selected program.
PROGRAMMING INSTRUCTIONS
Set Odd/Even Day Scheduling Option
Turn the large dial to the SCHEDULE position. The last scheduling option
chosen for the current program appears on the LCD. To set either an ODD or an
EVEN schedule press the SELECT + - button till an arrow appears on the LCD next
to the appropriate schedule (ODD or EVEN). A DATE must be set for odd/even
watering). The SELECT + - buttons act as toggle keys and will toggle between odd
or even.
NOTE: Programming an ODD/EVEN schedule deletes any other schedule for the
selected program.
Set Interval Scheduling Option
Turn the large dial to the SCHEDULE position. The last scheduling option
chosen for the current program appears on the LCD. Press SELECT +- to scroll to
the interval days position. An arrow will appear on the LCD next to INT
(Interval). Use the ADJUST +- to choose interval days between watering (1-30).
The date displayed is day one of the interval schedule. (Today’s date if one
has been set). To change day 1 date use SELECT +- to go to the interval start
date position. As needed, change the date for day one of the interval schedule
with ADJUST + - (can only be set up to 30 days out).
Repeat the above procedures for each program (A, B, or C), as you require.
That’s it! Your EZ Pro is now programmed. Turn the MODE dial to the AUTO
position to run the program you entered.
NOTE: Programming an INTERVAL schedule deletes any other schedule for the
selected program.
PROGRAMMING INSTRUCTIONS
PROGRAM REVIEW
To review the current program, Turn the MODE dial to the PROGRAM position
and turn the large dial to the setting you wish to review (i.e., turn the large
dial to TIME to review the time set for the controller). When you need to view
different zones or run times (1, 2, 3), use the SELECT + - buttons only.
NOTE: Since you are in the program mode, the potential exists to change
the program accidentally.