User Manual

L.R. Nelson Corporation

One Sprinkler Lane

Peoria, IL 61615

OEM Manual

8602 Radio Module

- 2 -

Requirements for compliance

• The antenna must be kept intact to maintain compliance. Alternative

antennae are not supported.

• The metal housing must be kept intact to maintain the module’s shielding

properties. The module must be kept unmodified as received except for

straightening the antenna if it is received out-of-shape due to shipping.

• If the FCC ID tag is not visible when the module is installed, then the

outside of the device into which the module is installed must display a

label referring to the enclosed module. Wording such as “Contains

Module FCC ID NYD8602” or “Contains FCC ID NYD8602” is sufficient.

The external label must also contain the wording “This device complies

with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference

that may cause undesired operation.

• The final product that the module is used in may be subject to other

certifications not covered by the module certification such as computer

accessories, etc.

• A power supply module is not supplied for the radio, therefore if it is

would be subject to testing for power-line conducted emissions.

EXPOSURE NOTICE

This device generates and radiates radio-frequency energy. In order to

comply with FCC radio-frequency radiation exposure guidelines for an

uncontrolled environment, this equipment has to be installed and operated

while maintaining a minimum body to antenna distance of 2.5 cm."

• Instructions must be provided to the OEM to place a statement,

similar to the one above, in their manual. This statement is to inform

the end users that this device does generate RF energy. The end

user must be made aware of the potential exposure to RF energy.