User's Manual

Troubleshooting and Service for the EZ Command
SYMPTOM POSSIBLE CAUSE SOLUTION
Unable to radio
connect
Controller ID and or
Programmer Code do not
match the EZ Pro
controller
Check that the
Controller Id and
Programmer Code match
exactly
Unable to radio
connect
Two EZ Pro controllers
in range with the same
Controller ID
Change the Controller
ID on one of the EZ
Pro controllers
Unable to radio
connect
EZ Pro does not have a
model 8602 Radio
Module installed
Install a model 8602
Radio Module
Unable to radio
connect
No AC power to the EZ
Pro controller
Connect AC power to
the EZ Pro controller
Poor radio connection Out of range or signal
blocked by obstruction
Move closer to the EZ
Pro location
Poor radio connection Weak batteries Install new alkaline C
batteries
Unit will not turn on Dead batteries Install new alkaline C
batteries
Low Battery Warning
(Pudik show the symbol
Low battery warning
from page 22 EZ Pro
instructions)flashing
on LCD
Weak batteries in the
EZ Command
Install two new
alkaline C batteries
in the EZ Command
Low Battery Warning
(Pudik show the symbol
Low battery warning
from page 22 EZ Pro
instructions)displayed
on LCD while radio
connnected
Weak batteries in the
EZ Pro
Install two new
alkaline AA batteries
in the EZ Pro
Technical Data
1. Temperature Range
Operating: -5 to +55 C
Storage: -30 to +85 C
2. Batteries