User's Manual

blinking cursor
Most operations are selected by choosing an option on the Programmer display. The
following are for your further reference.
Disconnected Menus
The following menus are available when the Programmer is not connected to an
actuator.
Setting Time and Day (TIME) - The current time and day can be set for the
Programmer. The Programmer will ask if you want a 12 hour (AM/PM) or 24 hour
clock. When the Programmer is connected to an actuator, the programmer
automatically updates the actuator time and day.
Choose Language (LANGUAGE) - Select your choice of English, French, Spanish,
Italian or Portuguese.
Set Programmer Code (PROGRAMMER CODE) - Each programmer has a four digit
code. This code is important if you are communicating via radio link with the 8081
Radio Programmer Plus. The actuator will only communicate via radio with one specific
code number 8081 Programmer.
Establishing Radio Connection (RADIO CONNECT) - See later section: "Radio
Connection 8081 Only".
Advanced Menus (ADVANCED) - See later section: "Advanced Menus".
Connected With a Cord to 8030 Series Remote Programmable Actuator or 8050 Series
PG Multi-Station Actuator Menus
Once the telephone cord is plugged into the 8030 Series Remote Programmable
Actuator or 8050 Series PG Multi-Station Actuator, a new series of menus is accessible.