User Manual
can be used to add clarity to a dark sound or reduce
unwanted brightness. The eect is o when the control
is set at noon. Turn the control clockwise for a punchier
attack or counter-clockwise for warmer, muted tones.
H. DRIVE
Pressing the drive button increases the growl’s frequency
range to a full overdrive.
I. VOLUME
The master volume aects both the ¼” and XLR outputs.
J. FAT
The fat switch bumps 150Hz for a round and full low-
frequency response without muddying up your tone.
The three settings are o (down), +3dB (middle), and
+6dB (up).
K. ¼” OUTPUT
The ¼” output is an unbalanced, line level output. You
can plug into any amp or device that has a ¼” input. For
best results, we recommend a full-range PA with a sub
or a quality bass amplier.
L. XLR OUTPUT
The XLR, or DI output (located on the top), is a
balanced output for connecting to a mixing board with
an XLR cable.