User Manual
GETTING STARTED
1. Power the Stadium DI with a 9V battery, 9V DC power
supply (not provided), or 48V phantom power. An
orange light will indicate 9V battery or DC power
and a green light will indicate 48V phantom power.
2. Plug your bass into the input to activate the Stadium
DI (upper right hand side) and a cable into the ¼”
output (upper left hand side) and/or the XLR output
(on the top).
3. Adjust the gain control by using the VU meter. Read
section B in this manual for setting your gain to the
appropriate level.
4. Plug the ¼” and/or XLR output cable into your amp
or PA and experiment with the Stadium DI.
Continue with this manual to learn more about its features.
TOP FEATURES
A. INSTRUMENT INPUT
The ¼” input is an unbalanced (mono), all-discrete input.
Plugging into the input will activate the Stadium DI,
therefore, unplugging will turn the system o. Be sure
to mute the PA or amplier before unplugging from the
Stadium DI to avoid a loud pop.
B. GAIN
Setting the gain correctly is vital for achieving optimum
sound quality and signal-to-noise ratio. Turn the volume
control on your bass all the way up rst. Begin with the