User Manual
C. PHASE INVERSION
Press this button to invert the phase. Usually
one phase will sound best and provide the most
resistance to feedback. We recommend trying both
phases each time you set up.
D. VOLUME CONTROL
Roll towards the neck to increase the volume or
towards the bridge to decrease the volume.
E. BATTERY CHECK
Press this button to check the life of the battery.
A full battery will light up all 5 LED’s and should give
you approximately 170 hours of playing time. When
only two lights are lit, you have about 8 hours of
normal playing time left. Replace the battery if only
one light is lit.
F. ANALOG WARMTH
Similar to highly revered tape and tube gear used
by engineers in a studio, the analog saturation
trim control adds warmth, enhances dynamics and
creates harmonically rich overtones. The factory
setting can be adjusted to taste with the provided
tool. Turn clockwise to add the eect.