User Manual
is carrying the majority of the guitar’s voice with the
Element pickup supporting only the lowest frequencies.
When in the pz position, you will hear the full range
Element pickup only.
Feel free to experiment with dierent positions as there
is a wide range of great sounding and useful settings.
E. Bass: Adds or subtracts the lower frequencies.
F. Treb: Adds or subtracts the highest frequencies,
“sparkle” or presence sounds.
G. Battery Status: As the battery weakens, the light will
turn on. DO NOT remove or replace the battery while
plugged in.
H. Notch Filter: The notch lter is to help control
feedback. If your guitar begins to feedback, slowly turn
the “notch” control from left to right. Feedback will stop
instantly when the “notch” is in the proper position.
I. Phase: Press this button to invert the phase. Usually
one phase will sound best and/or provide the best
feedback resistance.
J. Click-Lock Battery Access: The 9V battery is located
inside the preamp. To replace battery simply push down
on the bottom area of the face plate until you hear a
click then slowly release and the drawer will pop up.
IMPORTANT: When the Stage Pro Anthem is installed,
the pickup and mic must be connected to the correct
inputs on the back of the preamp to insure proper
operation. The silver wire for the pickup goes to Input 1,
and the black mic wire goes into Input 2.