User Manual

B. INSTRUMENT INPUT
The ¼” input is an unbalanced (mono), all-discrete
input. Plugging into the input will activate the Reverb,
therefore, unplugging will turn the system o.
C. DECAY
The decay control adjusts the length of the reverb tail.
Start with the control counterclockwise and you’ll
hear a subtle reection of your acoustic instrument.
Turn it clockwise and you’ll nd yourself playing in an
expansive, open space. Adjust to taste.
D. ENGAGE
Press the footswitch to engage the eects. When the
light is on, all of the controls on the Reverb are engaged.
When the light is o, the whole pedal is true bypassed.
E. REVERB
The reverb control blends an aected reverb signal with
an unaected instrument signal. When turned fully
counterclockwise, no reverb will aect the signal. Turn
clockwise to add reverb.
F. ¼” OUT
The ¼” output is an unbalanced, line level output. You
can plug into any amp or device that has a ¼” input. We
recommend running into any other LR Baggs Align
pedals, DI’s, or the Synapse Personal PA System.