User Manual

SPECIFICATIONS
1/4” INPU T
Input Impedance: 5.1 Megohms
Preamp Gain: -6dB,0dB, +6dB
Input Level: -25dBv to +3dBv (0.056Vrms to 1.414Vrms)
EQ
High-Pass Filter: 40Hz, 80Hz, 120Hz
Notch: -20dB, sweepable from 40Hz to 300Hz 1/8 octave
85Hz: +/-9dB
350Hz: +/-9dB
700Hz: +/-9dB
1.6kHz: +/-9dB
4.8kHz: +/-9dB
10kHz: +/-9dB
LINE OUTPUT
Output Level: -1.4dBv (0.848Vrms) Unbalanced
Output Impedance: 470 Ohms
POWER
DC Power Consumption: 43mW Max at 9V
DC Current Draw: 4.5mA
Voltage Range: 7.5VDC – 12VDC
Power Supply: 9VDC with 100mA minimum
*IMPORTANT: polarity Pos (+) on outside, Gnd (-) on center
9V Battery Life: 110 hours
Signal to Noise: 90dB, Unweighted
PHYSICAL CHARACTERISTICS
0.85 Lbs, 5” Length x 3.25” Width x 2” Depth
These specications may change without notice.