User Manual
SIDE FEATURES
A. DC INPUT
The DC power input is designed for a standard 2mm
plug commonly used with eects pedals and “oor-
box” products. Most power supplies or multi-power
devices designed for musical products may be used.
9VDC recommended with a 12VDC maximum. Plugging
in a power supply will activate the Equalizer.
A
systems. The variable “hpf” switches between 40Hz,
80Hz, and 120Hz.
H. ¼” OUTPUT
The ¼” output is an unbalanced, line level output. You
can plug into any amp or device that has a ¼” input. We
recommend running into any other LR Baggs Align
pedals, DI’s, or the Synapse Personal PA System.
I. VOLUME
The master volume will help you nd a balance between
your engaged and bypassed signal. It is only active when
the engage light is on. Keep in mind that your 6-band
EQ controls and gain switch will aect this balance.