User Manual

Hyperlink Extended Range WLAN Kit Installation Manual Rev. A Page

Hyperlink Technologies, Inc.

Installing the Amplifier Bracket for mast-mounting:

Install the right angle bracket as shown above using two (2) #10-24 screws and split

lockwashers as shown. Note the orientation of the label relative to the 90 degree

bend in the bracket. Proper positioning will ensure better visibility of the indicator

LEDs when installed on the mast.

Connections and Features of the Amplifier

Receive Indicator LED:

This LED illuminates green in receive mode.

Power Indicator LED:

This LED illuminates red in transmit mode.

Radio Connection:

This connection attaches to the DC Power Injector via the antenna feed cable, and

provides both signal and DC coupled power.