User Manual

Hyperlink Extended Range WLAN Kit Installation Manual Rev. A Page
11
Hyperlink Technologies, Inc.
Preparing for System Installation
Warning: These antennas are designed to be mounted in open areas such
as rooftops or building exterior walls. They are designed to be installed at
least 6 feet away from areas occupied by people. During system operation,
always keep the antenna at least 1 foot away from your head.
Warning: Before performing the following steps make certain that there are
not any power lines within 50 ft. If the mast should fall, either while installing
or during operation, contact with any power lines will be fatal or result in a
fire.
The Antennas are designed to be mounted on an aluminum or steel mast with a
diameter from 1-1/4 inches to 3 inches. A larger diameter mast would be
suggested for a more durable installation. This system includes a 50 foot
antenna cable.
In addition to the kit contents, you will need a ground wire and wire ties.