User's Manual

http://www.L‐com.com

WPA-PSK authentication mode, the encryption type supports both TKIP and

AES.

Config Methods –Correspond to the methods that AP supports as an

Enrollee for adding external Registrars (a bitwise or of values).

Value Hardware Interface

0x0001 USBA (Flash Drive)

0x0002 Ethernet

0x0004 Label

0x0008 Display

0x0010 External NFC Token

0x0020 Integrated NFC Token

0x0040 NFC Interface

0x0080 Push Button

0x0100 Keypad

Device Password ID–Indicate the method or identifies the specific password

that the selected Registrar intends to use. AP in PBC mode must indicate

0x0004 with two minute Walk Time.

Value Description

0x0000 Default(PIN)

0x0001 User-specified

0x0002 Rekey

0x0003 Display

0x0004 Push Button (PBC)

0x0005 Registrar-specified

0x0006~0x000F

Integrated NFC Token

Selected Registrar –Indicate if the user has recently activated a Registrar to

add an Enrollee. The values are TRUE and FALSE.

State –The current configuration state on AP. The values are Unconfigured

andConfigured.

Version –WPS specified version.

AP Setup Locked –Indicate if AP has entered a setup locked state.

UUID-E–The universally unique identifier (UUID) element generated by the

Enrollee. There is a value. It is 16 bytes.

RF Bands –Indicate all RF bands available on the AP. A dual-band AP must

provide it. The values are 2.4GHz and 5GHz