User's Manual

http://www.L‐com.com

Profile configuration – System Config Tab

This Tab allows configuration of basic connection parameters.

Profile Name– Enter a name to identify your profile. Default is PROF1.

SSID–Enter a network service set identifier (SSID) or select from a list of active

networks. If SSID broadcast function of AP is disabled, SSID must be entered

manually.

Network Type– You can select two wireless network types:

z The Infrastructure mode supports communications between a wireless

network and a wire network using an access point.

z The Ad hoc mode supports peer to peer communications between two

wireless network devices.

TX Power–Set the signal transmit power to be used by the radio transmitter.

Choose the appropriate value from the drop-down list.

Preamble–Select the preamble length, default is Auto.

Channel–Select the channel to be used when establishing an Ad hoc network.

Power Save Mode–Select the power saving mode.

z Using CAM (Constantly Awake Mode), the network adapter will operate at

full power when connected to mains.

z Using PSM (Power Saving Mode), the network adapter will enter power

saving mode.

RTS Threshold –Use the slider or enter a value for the RTS threshold in the field

provided. Default value: 2347.

Fragment Threshold–Use the slider or enter a value for the fragment threshold

in the field provided. Default value: 2346.