Portable Bluetooth CD Cassette Player with AM/FM Radio MODEL: CD-590 USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE
WARNING TO PREVENT FIRE OF SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the bottom enclosure of the apparatus. The Rating plate is located at the bottom enclosure of the apparatus. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions.
15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. 16. Do not overload wall outlet. Use only power source as indicated. 17. Use replacement part as specified by the manufacturer. 18. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 19.
CAUTION Follow the advice below for safe operations. ON PROTECTION AGAINST LASER ENERGY EXPOSURE As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. Stop operation immediately if any liquid or solid object should fall into the cabinet. Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not operate properly. Do not put anything in the safety slot.
PROTECT YOUR FURNITURE This system is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture.
LOCATION OF CONTROLS E-5
1 CD SKIP - BUTTON 16 CASSETTE PAUSE 2 CD SKIP + BUTTON 17 17. CASSETTE STOP/EJECT 3 ALBUM BUTTON 18 CASSETTE FAST FORWARD BUTTON 4 SPEAKER(L) 19 CASSETTE REWIND BUTTON 5 CASSETTE DOOR 20 CASSETTE PLAYBUTTON 6 POWER INDICATOR 21 CASSETTE RECORD BUTTON 7 LCD DISPLAY 22 VOLUME CONTROL 8 FM STEREO INDICATOR 23 FUNCTION SELECTOR (RADIO / OFF/TAPE / CD / BT) 9 CD PLAY/PAUSE 24 TUNING CONTROL 10 CD STOP BUTTON 25 BAND SELECTOR (FM ST.
POWER SOURCES This unit operates on 120V~ 60Hz or 6 x DC1.5V "C" (UM-2) batteries(not included). Do not attempt to operate the unit on any other power source. You could cause damage to the unit and void your warranty. Please be sure the power outlet you plug this unit into is working and receives constant (unswitched) power. AC OPERATION Plug the detachable AC cord into a standard AC outlet (120V~60Hz). 1.
BATTERY REPLACEMENT When the output sound of this unit becomes distorted or the CD player operation appears unstable, the batteries are weak. You need to replace all the exhausted batteries at the same time as soon as possible to avoid battery leakage. RADIO OPERATION 1. Set the FUNCTION SELECTOR (#23) to RADIO position. 2. Set the BAND SELECTOR (#25) to “AM” or “FM / FM ST.” for the desired radio band. 3.
REPEAT MODE Repeat 1: When the MODE BUTTON (#11) is pressed one, the symbol “REP” will flash on the display. The current track is repeated continuously. Repeat folder(Only for MP3): When the MODE BUTTON (#11) is pressed twice, the symbol “REP ALBUM” appears on the display. The selected folder is repeated continuously. REPEAT ALL When the MODE BUTTON (#11) is pressed twice (three times), the symbol “REP ALL” appears on the display. All music titles are repeated continuously.
CASSETTE PLAYER / RECORDER OPERATION 1. Press the CASSETTE STOP/EJECT BUTTON (#17) to open the Cassette Door and insert a pre-recorded cassette tape with the exposed tape facing upwards. Push the Cassette Door to close it. 2. Set the FUNCTION SELECTOR (#23) to OFF/TAPE position, press the CASSETTE PLAYBUTTON (#20) to start playback and adjust the Rotary Volume Control to obtain the desired sound level. 3. Press the CASSETTE F.
AUX IN OPERATION This unit provides an AUX IN JACK (#28) for connecting external audio devices like MP3 players, CD players, smart phones and iPods (except iPod shuffle 3rd generation) to listen to your external source through the speakers of this system. 1. You need an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable. 2.
CARE AND MAINTENANCE 1. 2. 3. 4. 5. Do not subject the unit to excessive force, shock, dust or extreme temperature. Do not tamper the internal components of the unit. Clean your unit with a dry cloth. Solvent or detergent should never be used. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. 6.
If the cassette feels tight while performing operation shown (see Fig.2), the tape may be jamming due to ridges formed in the winding of the tape (visible through the center window). These may be removed, in most cases, by fast winding of the cassette from one end to the other and back again. Use only well-known brands of tape. Avoid use of C-120 cassettes. Furthermore, do not expose cassettes to direct sunlight, dust or oil, and do not touch the tape surfaces.
TROUBLE SHOOTING GUIDE If you experience difficulties in the use of this clock radio, please check the following or call 1-800-777-5331 for Customer Service and support Symptom Possible Cause Solution Noise or sound - Station not tuned properly for AM - Retune the AM or FM broadcast station. - FM: Extend FM telescopic antenna. distorted on AM or or FM. FM broadcast - FM: FM telescopic antenna is not - AM: Reposition the unit until the best reception is obtained. extended.
90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.