Install Manual

Preliminary
SKY899
Installation Manual
4-16
Rev. A
The buttons perform the following operations in this mode:
EXIT - causes the system to return to the Information Menu.
Soft-key (2) - toggles the system through the above (ABV), normal (NRM), below (BLW), and
unrestricted (UNR) altitude display modes. It is labeled to indicate current mode (i.e.,
ABV, NRM, or BLW).
Soft-key (3) - toggles the display range between 2, 6 and 15nm. It is labeled to indicate current range
(i.e., 2nm, 6nm or 15nm).
Soft-key (4) - is not used.
4.4.5 Configuration Management
Configuration Management menu allows you to save system configuration to a compact flash, retrieve
system configuration from a compact flash, or restore system configuration to factory defaults. To access
configuration management, select it from the Service Menu.
The Configuration Management screen displays the following:
BRT
OFF
EXIT
NEXT
SEL
PREV
Retrieve from CF
Restore Factory Defaults
Archive to CF
Config Management