Install Manual

Preliminary
SKY899
Installation Manual
4-11
Rev. A
4.4.2.1.Software Version
Select Software Version menu to display the overall system software version.
NOTE
The software version identified on the TRC serial number tag represents the system
software revision and is a combination of the software/firmware installed within the
TRC. The software version displayed in this menu may not match the software
version (system revision) identified on the serial number tag.
The Software Version menu displays the following:
BRT
OFF
EXIT
Software Version
SKYHP Vx.x
4.4.2.2 System Log
The 20 most recent errors detected by the system self-test are saved in the System Log. For each error, the
corresponding error code, date and run-time of occurrence are saved. The system log is displayed by
selecting that option from the Information Menu.
NOTE
Tables 4-2 and 4-3 provide a list and description of each error code (see paragraph 4.6 error
messages).
The System Log displays the results in the following format:
BRT
OFF
EXIT
NEXT
SEL
PREV
System Log
24 12
Software Error
##
##
##
/22/00 12:24:35
MM/dd/yy hh:mm:ss
MM/dd/yy hh:mm:ss
MM/dd/yy hh:mm:ss
With an Error highlighted
pressing SEL will
cause error description
to appear
Using Next button to scroll
down will cause additional
erros (up to 20) to appear.
where:
## = Error code.
MM:dd:yy = Date (month, day and year)
hh:mm:ss = Run-time (in hours, minutes and seconds) when error occurred.
If the System Log is empty, the following message is displayed:
NO FAULTS DETECTED