Install Manual

Preliminary
SKY899
Installation Manual
4-7
Rev. A
4.4.1.5 Avionics Equipment
Avionics equipment menu allows you to set the source equipment interfaced to SKY899 and sets discrete
inputs. With all of the avionics turned on in the aircraft select Browse All Avionics from the avionics
equipment menu. This will sequentially step you through the setup of all avionics equipment interfaces.
After completing Browse All Avionics selections, corrections can be made by selecting the individual items
from the Equipment menu.
The Avionics Equipment menu provides the following choices:
BRT
OFF
EXIT
NEXT
SEL
PREV
Equipment
GPS Nav
[Gama]
Magnetic Heading
[None]
Barometric Altitude
[None]
Browse All Avionics
Radio Altitude
[None]
Landing Gear
[None]
Weight-On-Wheels
[None]
Audio Suppression
[None]
External Display
[None]
Using Next button to scroll
down will cause these
additional menu choices to
appear one at a time.
If ARINC-429 equipment is selected in the avionics equipment menu, but was not configured in the
communications port menu the following menu will appear:
BRT
OFF
EXIT
NEXT
SEL
PREV
No Chan Assigned
Ch.2: Multi 100 kHz
Ch.3: None 100 kHz
Ch.4: None 100 kHz
Ch.5: None 100 kHz
Ch.1: None 100 kHz
Choose a channel
This Menu appears when
ARINC 429 equipment has
been selected, but was not
assigned to a channel via
the Communication Ports Menu
The Avionics Equipment sub-menus are as follows.
The GPS Nav menu provides the following choices:
BRT
OFF
EXIT
NEXT
SEL
PREV
GPS Nav
GAMA
ARINC 743A
*None*