Install Manual

Preliminary
SKY899
Installation Manual
E-5
Rev. A
Commands Descriptions
Repeat
The repeat command allows you to repeat a command a specific number of
times with a specified amount of time delay between the commands
execution.
Repeat [{number} {delay} {command}]: Repeats command.
{number} - number of times to be repeated, zero will cause command to
repeat until a key is pressed.
{delay} - number of milliseconds delay between commands.
{command}- command to be repeated.
Repeat -?: Abbreviated help screen.
Repeat --help: Help screen with descriptions.
Repeat --about: About screen information.
Time
The SKY899 does not have a real-time clock. The time command allows you
to see the time received via the GPS nav information, if available. If not
available, the time displayed will be the software creation date.
Time: The year is :2000
The month is :8
The hour is :13
The minute is :51
The second is :38
The millisecond is :3
Time -?: Abbreviated help screen.
Time --help: Help screen with descriptions.
Time --about: About screen information.
Type
The type command allows you to see the contents of a file.
Type [{filename}]: Displays the contents of a file.
Type -?: Abbreviated help screen.
Type --help: Help screen with descriptions.
Type --about: About screen information.
Ver
The ver command allows you to see the system software version. It includes
the following information: MQX Copyright, MQX Library Creation Date,
MQX Version, Build Copyright, Build Version, Build MakeDate, Build
MakeTime, CPU Type, and CPU Number.
Ver: Displays system software version.
Ver -?: Abbreviated help screen.
Ver --help: Help screen with descriptions.
Ver --about: About screen information.