Install Manual

Preliminary
SKY899
Installation Manual
E-3
Rev. A
Commands Descriptions
Delay
The delay command allows you to create a delay (pause) between commands.
Can be useful when creating script files, it is intended for factory use only.
Delay [milliseconds]: Delays specified amount of time [milliseconds] before
executing the next command.
Delay -?: Abbreviated help screen.
Delay --help: Help screen with descriptions.
Delay --about: About screen information.
Dir
The dir command will display all of the files located on the compact flash. If
a compact flash is not present no information will appear.
Dir: Lists all files located in a directory, if name is left blank it
will show all directories and files located on the compact
flash.
Dir -?: Abbreviated help screen.
Dir --help: Help screen with descriptions.
Dir --about: About screen information.
DR
The dr command allows flight data to be recorded to a compact flash and is
intended for factory use only.
DR [on/off]: Records flight data. DR on opens new file and starts
recording data. DR off stops recording data. If DR is on and
DR on command is executed the old file is closed and a new
file is opened and starts recording data.
Attrib -?:
Abbreviated help screen.
Attrib --help: Help screen with descriptions.
Attrib --about: About screen information.
Echo
The echo command allows you verify communication between system and
terminal device. Sent text will be displayed on the laptop if proper
communications has occurred.
Echo [{text}]: Sends text through unit back to terminal device.
Echo -?: Abbreviated help screen.
Echo --help: Help screen with descriptions.
Echo --about: About screen information.
Edit
The edit command allows you to edit a text file on the compact flash.
Intended for factory use only.
Edit [filename]: Opens file to be edited.
Edit -?: Abbreviated help screen.
Edit --help: Help screen with descriptions.
Edit --about: About screen information.