Install Manual Part 3

SKY497
Installation Manual
D-3
Rev. C
Commands Descriptions
Cal (help)
Calibrates the antenna to the system (includes cables, connectors, and
TRC497).
Cal: Performs system calibration.
stp>cal
Asking for current calibration value.
Starting calibration. Please Wait...
Re-Calibration Successful!
Old Cal Value: 283 degrees
New Cal Value: 273 degrees
Cal help: Displays the command specific help message.
Config
Displays the state of the configuration pins, switches, barometric altitude
bits, and internal voltage and temperature readings. Checks the
input/output circuitry. Data shown is live and will change as the sensor or
configuration changes. To view changes re-type the config command.
stp>config
SKY497 Configuration Straps:
Hdg. (XYZ/STEP/429): XYZ
P1-70 : GND
P1-69 : OPEN
Heading Flag Sense : HIGH
P1-68 : GND
DR/Alt.422 (DR/422): DR
P1-67 : OPEN
Ant. Pos. (TOP/BOT): TOP
P1-100 : OPEN
Antenna NY(164/156): NY164
P1-99 : OPEN
Airframe (FIX/ROT): FIX
P1-98 : OPEN
Alternate Display Type: None Selected
P1-80 : OPEN
P1-79 : OPEN
P1-78 : OPEN
P1-77 : OPEN
IOP Soft Switches:
Squat (ON GND/FLY): ON GND
P1-88 : GND
Gear (UP/DOWN): DOWN
P1-87 : GND
GPWS (ACT/INACT): INACT
P1-32 : OPEN
Barometric Encoded Altitude:
d4 c4c2c1 b4b2b1 a4a2a1
0 0 1 0 0 1 1 0 0 0
Altitude: 1000 feet
a1=P1-40 b1=P1-51 c1=P1-58
a2=P1-41 b2=P1-56 c2=P1-59
a4=P1-50 b4=P1-57 c4=P1-71
d4=P1-72
IOP Internal Status:
Internal +5 VDC: +5.1 V
Internal +15 VDC: +15.0 V
Internal -15 VDC: -15.1 V
Internal Temp. : +34 C