Install Manual Part 3
Table Of Contents
- CHAPTER 4- MAINTENANCE
- APPENDIX A - SIGNAL & CABLE CHARACTERISTICS
- APPENDIX B - CHECKOUT USING TCAS-201 RAMP TEST SET
- APPENDIX C - CHECKOUT USING T-49C FLIGHTLINE TESTER
- APPENDIX D - USING THE TERMINAL DEVICE
- APPENDIX E - CHECKOUT USING ALTERNATE DISPLAY
SKY497
Installation Manual
D-2
Rev. C
Commands Descriptions
Arinc429
Displays the ARINC-429 sensor inputs and label status. Data shown is live
and will change as the sensor changes. To view changes re-type the
command.
stp>Arinc429
Arinc429 Operating,
Rx: Seeking, Low
Rx Parity Errors: 0
Lbl Functn Chn Ssm Value
164 RadAlt --- --- ------
203 BarAlt --- --- ------
320 MagHead --- --- ------
Arinc735
Displays the ARINC-735 alternate display type and status. Data shown is
latched during turn on, configuration changes will not take affect until
power is cycled.
stp>arinc735
Tx Selected: None Selected
stp>arinc735
Tx Selected: ARINC735 Type1
stp>arinc735
Tx Selected: Illegal Display
Bar (help)
Displays the barometric altitude source, validity, and value. Data shown is
live and will change as the sensor changes. To view changes re-type the
command.
Bar help: Displays the command specific help message.
Bar: Displays barometric altitude data.
stp>bar
Barometric Altitude source: Encoded Inputs
Barometric Altitude: 1000 feet
Encoded Altitude Bits
d4 c4c2c1 b4b2b1 a4a2a1
0 0 1 0 0 1 1 0 0 0
Encoded Altitude: 1000 feet