Install Manual Part 2

SKY497
Installation Manual
2-29
Rev. C
2.10.2 Display Installation
Figure 2-14 shows a typical display installation. The display can be mounted to the instrument panel from
the front or from the rear. An optional mooring clamp is available for increased stability in high-vibration
environments.
Figure 2-14. Display Installation
Use rivnuts® or a mooring clamp to secure the display to the instrument panel.
NOTE
1. The mooring clamp is not furnished with the display.
2. A mooring clamp (P/N 78-8060-5856-2) can be ordered when the order for the
display is placed.
3. A 3ATI mooring clamp is also available from:
MSP, Incorporated
R.R. 4, Box 383A
Nashville, Indiana 47448
Tel. [phone] or FAX [phone]