User Manual

ManualsBrandsKYUNGWOO SYSTECH ManualsElectronicsSMK READER

www.kyungwoo.com

2020. 02. 11

Prepared(작성)

Reviewed(검토)

Approved(승인)

Park Jeguk

SMK-HXV Reader

User’ Manual

Summary of content (8 pages)

PAGE 3
Chip Key / Flip Key Reader User’manual Rev (1.0) – Contents – Revision History 1. Synopsis 2. Product Image 3. Block Diagram 4. Specification www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc.
PAGE 4
Chip Key / Flip Key Reader User’manual Rev (1.0) 1. Synopsis This do cument is specifi cally-written manual for SMK Reader which is receiver and transmitter of wireless communication, which is to confirm user identifications under engine-start limiting function in heavy equipments. SMK Reader is defined as followings; SMK Reader transmits a signal pattern by RFID 125 KHz in order to wake up Chipkey/Flipkey Tag. And then SMK Reader communicates with Chipkey/Flipkey Tag by 433 MHz wireless signal.
PAGE 6
Chip Key / Flip Key Reader User’manual Rev (1.0) 3. Block Diagram SMARTKEY READER CLUSTER Inductive data LF LF ANT MCU MCU Transceiver - UHF UHF + CAN 3V BATTERY CAN Network CAN SMARTKEY TAG UHF data 12V or 24V, GND + - 24V BATTERY 4. Specification 4.1. Operating Specification -. Must transmit a signal of RFID 125 KHz as a wake up pattern signal. -. Must be activated from 12 Vdc/24 Vdc external voltage supply. -. Must be able to analyze the password-secured signal. -.
PAGE 7
Chip Key / Flip Key Reader User’manual Rev (1.0) -. PCB Material object/part No. SMK READER B/D PCB manufacturer/ trademark type/model technical data UL No. JM ELECTRONICS CO LTD D V-0 ; 105 C E117655 mark(s) of 1 conformity ) JM 4.4 RF Specification Item Wireless Data Communication System Magnetic Induction System 4.5.
PAGE 8
Chip Key / Flip Key Reader User’manual Rev (1.0) FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.