User's Guide

3. How to use the headset
Once the On/Off switch is turned to the Bluetooth side, the headset will be on and automatically goes into paring
mode looking for a device to connect. While doing so, it accounces its current battery status.
When the headset is in paring mode, blue LED will blink and stay on when connected with other devices.
Put the headset and adjust the headband to find your best fit. The microphone boom should be close enough to your
mouth in order to work properly.
Turn On/Off switch to Off side to turn the headset off.
4. PC connection using the USB dongle
When the headset is on and the USB dongle is plugged into PC, blue LED from the dongle will blink trying to pair with
the headset. In few seconds, the dongle will be paired with the headset and blue LED will stay on.
5. Bluetooth pairing
(1) It is better to have the headset and a mobile device/PC close together (less than 1m is ideal).
(2) Put On/Off switch to Bluetooth side. The headset will go into pairing mode flashing blue LED.
(3) Complete the paring by selecting KB-10 on your mobile device (or plug the dongle into PC). Blue light will stay
on with successful pairing.
(4) If you want to pair the headset to another device, you can press and hold the MFB (Multi Function Button) to go
into pairing mode again.
(5) KB-10 can be connected to 2 devices simultaneously, but it can only play 1 device at a time. It will
automatically switch between 2 devices based on their sound signals.