Introduction Thank you for purchasing the Altec Lansing Solo Jacket IMW375 Bluetooth Speaker. You can use this speaker to listen to audio wirelessly from devices such as smart phones, computers, iPods, tablets and most other Bluetooth sound sources. Furthermore you can pair two Solo Jacket speakers to your Bluetooth device simultaneously for true stereo sound. Please read this manual carefully FIRST in order to get the most out of your speaker.
Important Safety Precautions When using your speaker basic safety precautions should always be followed, including the following: 1. 2. 3. 4. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER. Never expose your speaker to high temperatures. In order to avoid the risk of electric shock, never attempt to open your speaker or repair it without the assistance of certified professionals.
Features -Seamlessly stream music from your iPad, iPhone, Android device, laptop, tablet or other Bluetooth enabled device that support the A2DP profile. - Waterproof, Dustproof, Shockproof, Sandproof - Can be used in conjunction with a second unit to create true stereo sound Package Contents 1. Altec Lansing Solo Jacket IMW375 Bluetooth Speaker 2. Carry Pouch 3. USB Charging Cable 4. Karabiner Clip 5. 3.5mm Auxiliary Cable 6. Extra Skin Jacket 7.
Technical Specifications - Battery Life: up to 6 hours - Charging Your Speaker 1. Connect one end of the included USB charging cable to the IMW375 DC input jack. Then plug the other end of the cable into an available USB port on your computer to recharge your speaker’s internal rechargeable battery. NOTE: The internal battery of your speaker takes approximately four hours to charge when completely drained. 2. When charging, a red LED light will illuminate to indicate that the unit is charging.
Understanding the LED Status Indicators Power and Bluetooth Indicator Light Blinking Green LED = Your speaker is powered ON and ready for Bluetooth pairing with another Solo Jacket speaker for true stereo sound. Blinking Blue LED = An individual Solo Jacket speaker is ready to be paired with your Bluetooth device for MONO sound, or a pair of Solo Jacket speakers are ready to be paired with your Bluetooth device for STEREO sound.
Setting Up Your IMW375 Bluetooth Music Receiver Bluetooth Device Compatibility Your speaker connects with all Bluetooth devices that support the A2DP profile including iPads, iPhones, iPod touches, and most smart phones, laptops and tablets. Pairing a Bluetooth Device with Your Speaker Press and hold the “POWER” button for two seconds to turn on the unit. The speaker’s LED light will start blinking slowly. Now you are ready to pair your Bluetooth device with your IMW375 speaker. 1.
When there is an incoming call: 1. Press the “Power” button to pick up the call. 2. Press and hold the “Power” button to reject the call. 3. During the call: Press the “Power” button to hang up the call. To Disconnect Your Bluetooth Device Turn off the paired Bluetooth device or press the Volume “+” and “-“ buttons simultaneously to disconnect the Bluetooth device from your speaker. Your speaker will power off automatically.
Playing music from a non-Bluetooth device The IMW375 includes a 3.5mm Auxiliary Cable. To listen to music from a non-Bluetooth device, plug on end of this cable into the Aux In jack located on the back of the IMW375 (you will need to open the waterproof cover). Plug the other end of the cable into the 3.5mm headphone jack of your non-Bluetooth device. Set the volume on the device to ¾ volume and begin playing music. Adjust the volume on the IMW375 to a suitable listening level.
Pairing Two Solo Jacket Speakers with Your Bluetooth Device for True Stereo Sound With the purchase of an additional Solo Jacket speaker, you can pair both speakers to your Bluetooth device in order to get true stereo sound. To do so, follow the steps below: 1. Press and hold the “POWER” buttons on both speakers simultaneously for 5 seconds. The speakers will say, “Powering On” and then emit a beeping sound to indicate both speakers can be paired to your Bluetooth device.
Note: The volume controls on your Bluetooth device work separately from the volume controls on the IMW375. NOTES -When two speakers are paired in stereo, and you turn off one speaker, the second speaker will turn off automatically. -For balancing the volume level on two speakers, maximize the volume on both speakers and control volume using the Bluetooth device or use the volume controls on the speakers to balance the volume level.
FAQ: Frequently Asked Questions 1. I am having Bluetooth pairing or connection problems, what do I do? A.) Make sure your Bluetooth device is turned on and is on the discoverable mode. (A blinking blue light denotes that the speaker is ready to accept connections) B.) Make sure your speaker is not already connected with another device (easiest way to determine this is if you see a steady blue light in the center of the speaker). C.
no other device is available for connection. Turn on Bluetooth on your phone/player. Click on “Scan” for Bluetooth devices from your phone/player to discover IMW375.Now click on IMW375 to connect. H.) Please note this speaker can be paired with up to 8 devices and will establish automatic connection to these devices. If you’re trying to pair with more than 8 devices, it will pair but you may have issues connecting to the initially paired devices.
Warning When using your speaker please follow these important safety precautions: 1) 2) 3) 4) DO NOT USE the product near a heat source or expose to direct sunlight for an extended period of time. Use only the approved power supply unit provided in the box. DO NOT leave the product plugged to the main AC power when not used for an extended period of time. Make sure the product is near a main power supply outlet and you can access the power breaker switch.
Technical Support For technical support issues please visit our website at www.alteclansing.com. You can find manuals, software and FAQ’s at the website. Can’t find what you are looking for? Fill out an online ticket and one of our technical support team members will answer questions or call 1-855-292-4087 to access our technical support information on the phone.
Altec Lansing One Year Warranty Card This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitation or exclusions may not apply to you.
FCC Statement For Users (USA Only) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference , and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Notes on Disposal Dispose of the appliance, packing material and accessories only at specified collection points. Follow the regional and national disposal requirements with regard to the separation of material, waste collection and recyclable material depots.
