Operation Manual

System Menu

7-22

Selecting Output Destination

Set the default copy output destination.

NOTE: This setting is displayed when the optional job separator, document finisher or 3000 sheet

document finisher is installed.

Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default

screen.

Press [S] or [T] to select Select Copy output mode and press [Change #].

Select the output destination.

Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine

Default screen.

Selecting FAX Output Mode

Set the default output destination for printing originals or reports received by fax.

NOTE: This setting is displayed when the fax kit and optional job separator, document finisher or

3000 sheet document finisher is installed.

Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default

screen.

Press [S] or [T] to select Select FAX output mode and press [Change #].

Select the output destination.

Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine

Default screen.

Paper Output Description

Top tray Outputs to the built-in output tray.

Job separator Outputs to the optional job separator.

Finisher tray Outputs to the optional document finisher tray.

Tray A Outputs to Tray A of the optional 3000 sheet document finisher.

Tray B Outputs to Tray B of the optional 3000 sheet document finisher.