Operation Manual

Included Scanner Utilities
6-21
Basic - Color/Monochrome (Gray) mode
The setting items are as follows.
Basic - Universal mode
The setting items are as follows.
Extension
The setting items are as follows.
Setting Item Value Description
File Type JPEG, TIFF, PDF, PDF (High
Complex)
Specify the file type when saving a
scanned image.
JPEG quality 1 (Low), 2, 3 (Standard), 4, 5 (High) Set the JPEG quality.
High Compression
PDF quality
1 (Low size), 2 (normal), 3 (High
quality)
Sets high compression PDF quality.
Output Color Type RGB, sRGB Configure the color output type.
Density
Adjustment (Auto)
-3 - +3 When density adjustment is set to
Auto, adjusts the overall dark/light
balance.
Density
Adjustment
(Manual)
-3 - +3 When density adjustment is set to
Manual, adjusts the overall dark/light
balance.
Setting Item Value Description
Resolution 600dpi, 400dpi, 300dpi, 200dpi Select from the following four
resolutions to scan an original.
Multiple Scanning OFF, ON Select whether to scan originals in a
continuous operation.
File Name Enter the filename using less than 16
characters.
Specify the name used when saving
scanned images.
Setting Item Value Description
Full scan – Does not function on this scanner.
Centering ON, OFF When scanning with zoom, by
specifying the Original size and the
Send size, blank borders around the
bottom or left and right will be shown
depending on the sizes. When setting
Auto Center, the image is moved to the
center so that blank borders around
the top and bottom or left and right
become even.
Uncompress
scanning
– Does not function on this scanner.
Continuous
sending
ON, OFF Use the same settings from a
previously completed transmission for
the next transmission. The scan
function screen is returned with the
sender (user), destination and other
settings remaining from the previous
operation.
File name Input Manual, Auto/Manual Displays the filename input box
without displaying the auto/manual
selection screen.