Operation Manual

Setting Scanner from a Web Browser
5-11
Basic - Black and White Mode
The setting items are as follows.
Basic - Color/Monochrome (Gray) Mode
The setting items are as follows.
Basic - Universal mode
The setting items are as follows.
Setting Item Value Description
Orig. image
quality
Photo, Text, Text+Photo, OCR Select from the following four modes
depending on the type of original being
scanned.
File Type TIFF, PDF Specify the file type when saving a
scanned image.
Setting Item Value Description
Density
Adjustment (Auto)
-3 – +3 When density adjustment is set to
Auto, adjusts the overall dark/light
balance.
Density
Adjustment
(Manual)
-3 – +3 When density adjustment is set to
Manual, adjusts the overall dark/light
balance.
File Type JPEG, PDF, TIFF, High Compression
PDF
Specify the file type when saving a
scanned image.
PDF/TIFF/JPEG
Quality
1 (Low), 2, 3 (Standard), 4, 5 (High) Specify PDF, TIFF and JPEG quality.
High Compression
PDF Quality
1 (Compression Ratio Priority), 2,
3 (Quality Priority)
Sets high compression PDF quality.
Output Color Type RGB, sRGB Configure the color output type.
Setting Item Value Description
Resolution 600dpi, 400dpi, 300dpi, 200dpi Select from the following four
resolutions to scan an original.
Multiple scanning On, Off Select whether to scan originals in a
continuous operation.
File Name Enter the filename using less than 16
characters.
Specify the name used when saving
scanned images.