XXXXXXXX User Guide Contents Getting Ready Basic Operations Safety Precautions Appendix DE GB
Preface Thank you for buying this product. Before using the product, be sure to read "User Guide" (this manual) to ensure correct use. After you have finished reading the manuals, be sure to keep them accessible. • Reproduction of the content of this manual in part or in whole is prohibited. Regarding Notations Used in This Document ■■Note on Button Illustrations In this manual, buttons are simplified as shown below.
■■Description of Operations for Selecting Item/Icon/Button etc. Notations used for operation procedures in this manual are as follows. Description Home screen → [ ]→[ ] In sleep mode, F (Power button) ■■Notes on Illustrations/Screenshots The illustrations and screenshots in this manual may look different from the actual illustrations or screens. Note that part of the screen etc. may be omitted. Explanation Tap " (Chrome)" on the home screen. Tap [ ] In sleep mode, press F (Power button).
◎◎In this manual, the operations with horizontally oriented screens are provided as examples. With vertically oriented screens, descriptions for menu item/icon/onscreen button may be different. ◎◎Menu items, layers and icons described in this manual may be different according to functions being used and conditions.
Contents Preface............................................................................. 1 Operating Instructions...................................................... 1 Regarding Notations Used in This Document.................. 1 Contents...................................................4 Getting Ready...........................................5 Contents Names and Functions of Parts........................................ 5 Using microSD Memory Card..........................................
Getting Ready Names and Functions of Parts ⑥⑦ ⑧ ⑨ ① ② ③ ④ ⑩ ⑩ Power on On charge Charge completed Remaining amount of the battery is 5% below Color Green Red Green Red Behavior Illuminates Illuminates Illuminates Flashes Getting Ready ⑤ ① F Power button Press to power ON/OFF, activate/deactivate sleep mode, etc. ② microSD memory card slot cover ③ External connection terminal Used for connecting an external connection device, etc.
⑪⑫ ⑬ ⑭ ⑮ ⑯ ⑪ Microphone ⑫ rl Volume up / down button Press to adjust volume. ⑬ Name plate sticker ® ® * ⑭ Built-in Bluetooth / Wi-Fi antenna ⑮ Out camera (lens) ⑯ microSD memory card slot * The antenna is built into the product. Covering the antenna with your hand might affect communication quality. Getting Ready 6 ■ How to open the card slot cover Insert a fingernail a small way into one of the corners marked ○ and pull open the cover. ◎◎The exterior case of the product is not removable.
Using microSD Memory Card 3 Attaching/Removing microSD Memory Card ■■Attaching microSD Memory Card Open the microSD memory card slot cover of the product 2 Confirm the insertion direction of the microSD memory card, and slowly insert it into the slot until it clicks When inserting the card into the product, confirm the card is locked with snaps. Be aware that the card may fly out if you release your finger before the card is locked. Be careful about it.
Charging The internal battery is not fully charged at the time of purchase. Charge the battery before using the product. When the red light turns into green, the charging will be completed. 4 Slowly pull the microSD memory card Getting Ready Slowly pull out the card as straight as possible. Depending on the microSD memory card, it is difficult to pull out from the slot due to the failure of unlocking. In that case, remove the card by pulling lightly with your fingers.
Charging with the AC Adapter How to charge the product using the supplied AC adapter is described here. 1 Connect the power plug of the supplied AC adapter to an outlet (100V - 240V AC) 2 Insert the DC plug of the supplied AC adapter to straight into the charging terminal Make sure that the charging light turns into red. When the battery power turns on, " " appears on the status bar. When charging is complete, the charging light turns into green.
Turning the Power On/Off Turning the Power On 1 Press and hold F (Power button) until the notification light turns on The start screen appears (▶P. 17). • For the first time you turn on the product, the initial settings activate. Set them as required. Getting Ready ◎◎When logos are being displayed on the screen, do not touch the screen because the initial setting of the touch panel activates. Doing so may prevent the touch panel from working properly.
Using the Touch Panel The product is equipped with a touch panel, allowing you to operate by touching directly the screen with your fingers. ■■Tap/Double-tap Lightly touch a screen and then immediately release your finger. Tapping a screen twice in the same position is called doubletap. Keep touching an item, button, etc. Touch the screen and flick up/ down/left/right. ■■Zoom-in/Zoom-out While touching the screen with two fingers, move the fingers away and closer to each other.
Initial Settings 2 When you turn on the product for the first time after purchasing the product, follow the on-screen instructions to set language preferences, Wi-Fi®, Google account, and so on. Set up the Wi-Fi® network to connect as required • If you tap "SKIP" → [CONTINUE], an input screen for date & time appears. Set up them and proceed to step 10. From here on, follow the on-screen instructions. ■■Setting up Google Account Set up Google account to use Google apps such as "Gmail" and "Play Store".
4 [Create account] → [For myself] / [For my child] • If you have a Google account, enter a mail address or phone number → [Next]. 5 Enter "First name" and "Last name" → [Next] → Enter the birthday and gender → [Next] → Enter a user name you want → [Next] Checking registration of user name starts.
Getting Ready 14 6 Enter a password → Reenter the password for confirmation → [Next] 7 Set up the phone number 8 Check the contents, then [I agree] 9 Check the contents, then [Next] Confirm the Google service settings → [ACCEPT] • To set up, check the country and enter a phone number → [Yes, I'm in]* → follow on the on-screen instructions. • To not set up, tap "Skip". * Text message for Google verification code will be sent to the set phone number.
Set up the screen lock • To set up, enter a PIN → [NEXT] → reenter the PIN → [CONFIRM] • To not set up, tap [SKIP] → [SKIP ANYWAY]. Set up the Google Assistant • To set up, [Turn on] → follow the on-screen instructions. • To not set up, tap [No Thanks]. Set up the Google Pay • To set up, [Add a card] → follow the on-screen instructions. • To not set up, tap [Skip].
Set up other settings as required • To set up, make desired settings, return to the previous screen, and tap [DONE FOR NOW]. • To not set up, tap "NO THANKS". After settings are completed, tap [ ] to check the settings. Setting Wi-Fi® Use your home wireless LAN (Wi-Fi®) or public wireless LAN to connect to the Internet. 1 2 3 Getting Ready 16 Home screen → [ ] [Network & internet] → [Wi-Fi] → "ON" Wi-Fi setting screen appears, and available Wi-Fi® networks are listed.
Sleep Mode Start Screen The start screen is displayed when you turn the product on or cancel the sleep mode. Switching to the Home Screen from the Start Screen You can switch to the home screen with the following operations when the start screen appears. 1 Press F (Power button) while the backlight is turned on or perform no operation for a certain period, the screen goes off temporarily and the product enters sleep mode. Doing the following operation, cancel the sleep mode.
Basic Operations Using the Home Screen The home screen consists of multiple screens. Slide/flick right or left to switch the screen. ① ◎◎Alternatively, hold down F (Power button) for at least 1 second → [Screenshot] to take a screenshot. ◎◎Screenshots are saved to the internal storage. You can check saved screenshots on the "Photos", "Files", and so on. ◎◎Screenshot may not operate depending on an app and function.
Setting Do Not Disturb (Mute) 1 Press r (Volume up button) or l (Volume down button) • Volume adjustment bar is displayed. 2 [ ]→[ ] • An icon of the bar is switched to [ ]. Activating the Apps Tap an app icon to use its function. 1 Home screen → Tap an app/folder to activate • If you tap a folder, tap an app to activate from the app list in the folder. Setting Home Screen Set various displays of the home screen.
Notification Panel 1 Slide down the status bar Notification panel is displayed. to hide the notification panel. • Tap ① ② ③ ④ ⑤ Basic Operations 20 ① Date area ② Quick settings tile Turn on/off frequently-used functions. Slide down the notification panel to view a hidden tile, brightness adjustment slider, and settings menu icon. Tap "Edit" to select an icon to display. ③ Information (notification) area Check the product status and notification.
Setting Airplane Mode When Airplane mode is turned on, wireless functions are disabled (packet communication, wireless LAN (Wi-Fi®), and Bluetooth®). 1 Settings menu → [Network & internet] → " of "Airplane mode" to turn on. Tap " When Airplane mode is turned on, " " appears in the status bar. 1 Home screen → [ ] The settings menu is displayed.
Items Storage Settings Check memory capacity of the internal storage or microSD memory card, and initialize the microSD memory card. Security & location Make settings of location information and security. Accounts Manage online service accounts, and make basic settings on data synchronization. Accessibility Make accessibility service settings such as text size to be displayed. Google Check information on Google account and service, and change settings.
Safety Precautions When Using the Product Safety Precautions • Before you start using the product, make sure to read the "Safety Precautions" in this manual to ensure correct use. • Use this data communication terminal so that you can hold the product at least 1.5 cm away from your body and also do not contain metal parts between the product and your body. • Communication may not be possible in poor reception areas.
Safety Precautions 24 • Note that content data (both charged or free content) saved on the product cannot be returned to the customer when the product is replaced for repair of a fault, for example. • The product uses liquid crystal for its display. The main display response speed may become slow when the ambient temperature is low, which is due to the characteristics of liquid crystal and is not a malfunction. The main display response speed will return to normal at room temperature.
Safety Precautions (Observe Strictly) ■ Before using the product, thoroughly read this "Safety Precautions" for proper use. ■ These precautions are intended to protect you and others around you. Read and follow them carefully to avoid injury, damage to the product or damage to property. ■ The signs below differentiate between the levels of danger that can occur if the product is not used within the specified guidelines.
■■Precautions Common to the Main Unit, Internal Battery, Charger, Peripheral Devices DANGER Do not use, store or leave the product in hot places (e.g. by the fire, near a heater, under a kotatsu or futon, in direct sunlight, in a car in the hot sun). Doing so may cause fire, burns, injuries, or electric shock. Do not put the product into or near a heating cooking device such as a microwave oven or IH cooker, or high-pressure container such as a pressure cooker.
Use the optional products specified by the Company. Not doing so may cause fire, burns, injuries, or electric shock. WARNING Do not drop, trample, or throw the product or give a strong force or vibration to it. Doing so may cause fire, burns, injuries, or electric shock. Do not allow conductive materials (metal pieces, pencil lead, etc.) to come in contact with the charging terminal or the external connection terminal, and do not allow dust to get inside.
When children use the product, do not let them use incorrectly without instruction by an adult for proper use. Doing so may cause injuries. Do not store the product within the reach of babies. Especially, be careful where you store small parts. Doing so may cause accidental swallowing, injuries, or electric shock. Be careful when using the product continuously or charging as it gets hot. Also, avoid touching the product continuously falling asleep unintentionally.
Turn off the product or set it to Airplane mode before going aboard an airplane. Since using the product on airplanes is restricted, follow the instructions given by the respective airlines. The product's signals may adversely affect on-board electronic equipment. If you commit a prohibited act while using the product on an airplane, you might be punished by law. Follow the instructions given by the respective medical institution regarding the use of the product in a hospital.
CAUTION If the display breaks and the fluid leaks out from inside, do not let the fluid contact with the skin on your face or hands, or clothes. Doing so may cause eye or skin problems. If the substance inside the display enters your eyes, mouth, and so on, or comes into contact with your skin or clothes, immediately rinse the area with clean water. If the fluid enters your eyes, mouth, and so on, immediately see a doctor after rinsing. Do not discard the old product together with regular trash.
■■Charger WARNING Do not apply excessive force on the connection part with the AC adapter connected to the product. Doing so may cause fire, burns, injuries, or electric shock. Do not use if the cord of the AC adapter is damaged. Doing so may cause fire, burns, or electric shock. Do not touch the cord, charging terminal or power plug of the AC adapter with wet hands. Doing so may cause fire, burns, or electric shock. Do not touch the AC adapter if you hear thunder. Doing so may cause electric shock.
When plugging/unplugging the AC adapter into/ from the product, do not pull the cord with excessive force. Instead, plug/unplug it straightly toward the jack to connect. Not doing so may cause fire, burns, injuries, or electric shock. Stop using the product immediately if you notice deformation of the charging terminal. Also, stop using the product after recovering the original form of the terminal. Short-circuiting of the charging terminal may cause fire, burns, injuries, or electric shock.
■■Digitizer Pen Material List CAUTION Store small parts such as the spare pen tip out of small children's reach. Swallowing small parts by accident may cause suffocation or injuries. Do not press or hit the pen tip strongly against the display. Doing so may damage the display and cause malfunction. Do not apply excessive load or pressure on the pen tip. Doing so might cause a failure or malfunction. Be careful not to pinch your finger when you attach the pen tip. Doing so may cause injuries.
■ Digitizer Pen Part Main unit Pen tip Eraser Material ABS resin POM resin POM resin Surface Treatment Bitter coating - Handling Precautions These precautions are provided to prevent product faults and to ensure that performance can be fully demonstrated. Thoroughly read these precautions to ensure correct use. ■ Precautions Common to the Main Unit, Internal Battery, Charger, Peripheral Devices Safety Precautions 34 ●● Do not apply excessive force to the product during use.
●● Do not put the product in a cooking apparatus such as microwave oven or a pressure vessel. Doing so may cause malfunction. ●● Do not leave the product on unstable or sloping surfaces. Be careful especially when the product is charging. The product may fall and cause malfunction. ●● The customer is not allowed to disassemble, modify or repair the product. Doing so may cause malfunction. Modification of the product is in violation of the Radio Law and Telecommunications Business Law.
●● Never use the modified product. Use of a modified device violates the Radio Law and Telecommunications Business Law. The product has acquired such certification as conformity with technical regulations for a specified radio station based on the Radio Law and conformity with technical regulations for a terminal device based on the Telecommunications Business Law, and the "Technical Conformity Mark " is indicated in the name plate sticker on the product.
●● While writing/reading data to/from a microSD memory card, do not subject the product to vibration or impact, or turn off the power. Doing so may cause data loss or malfunction. ●● Do not cover the sensor with your finger or put a sticker on it. May hinder the sensor from detecting the ambient light level and functioning correctly. ●● Keep the microSD memory card slot cover closed when using the product. Using the product with the cover opened can allow dust, liquid, etc.
●● The internal battery may swell up as it approaches the end of its battery life. This is due to the properties of lithium-ion batteries, and is not a problem in terms of safety. ■ Charger ●● Do not wrap the cord of the AC adapter around the adapter unit. Do not forcibly bend the AC adapter plug or the connection between the connector and power cord. Do not place heavy objects on the cord of the AC adapter or USB connection cable, or do not pull the cord with excessive force.
Notes on Using Bluetooth®/ Wireless LAN (Wi-Fi®) Function Safety Precautions • The Bluetooth® function of the product conforms to domestic standards of Japan, FCC standards, and has been certified. • Use of the Bluetooth® function is limited in some countries or regions. If you use the product overseas, check the relevant laws and regulations of the country/region you visit. • The wireless LAN (Wi-Fi®) function of the product conforms to domestic standards of Japan, FCC standards, and has been certified.
Cautions on Using 2.4 GHz Band Safety Precautions 40 The frequencies used by the Bluetooth® and/or Wireless LAN (Wi-Fi®) function of the product are in the 2.4 GHz band.
Bluetooth® and wireless LAN (Wi-Fi®) functions of the product use frequencies in the 2.4 GHz band. • Bluetooth® function: 2.4FH1/XX1 2.4FH1/XX1 This product uses the 2.4 GHz band. FH-SS is used as the modulation scheme. The interference distance is about 10 m or less. The band of mobile unit identification devices cannot be avoided. • Wireless LAN (Wi-Fi®) function: 2.4DS4/OF4 Cautions on Using 5 GHz Band Outdoor use of 5.2 GHz/5.
Appendix Updating Software You can update the product to the most recent software for optimal performance and to get the latest enhancements. Use Wi-Fi® functions of this product to download and update the software. ■■Notes on Software Update Appendix 42 • It is recommended to back up your data before updating software. • For details, refer to the support information on the Kyocera homepage. • If software update has failed or stopped, perform the same procedure again.
Troubleshooting Before you assume that the product is malfunctioning, confirm the following contents. Trouble Cannot turn on power Cannot charge the product Is the internal battery adequately charged? Page P.8 P.10 P.8 P.9 Cannot operate button/touch panel A message indicating that charging is necessary is displayed The product can only be used a short time P.8 P.10 P.8 P.
After-Sales Service When Asking for Repair For repair, contact our support center below. ■ Smile Zemi Support Center 0120-XXX-XXX From some IP phones (Call charges must be paid by the customers) 0X-XXXX-XXXX Business hours: 10:00 to 20:00 * Except for our special holidays (December 31st, January 1st) Warranty Policy 1. The terminal will be repaired for free or replaced with the substitute terminal for free if the terminal is malfunctioning under conditions of proper use within the warranty period.
Bluetooth® function Main Specifications ■ Main Unit Display Communication range*3 Supported Bluetooth profile*4 Approx. 10.1 inches, approx. 16.77 million colors, Transparent TFT 1280 × 800 dots (WXGA) Approx. 550g Approx. 269 × 179 × 10.2 mm Weight Dimensions (W × H × D) Internal memory*1 Charging Supplied AC times adapter (estimate) Camera image pixel Effective out-camera pixels Effective in-camera pixels Wireless LAN (Wi-Fi®) function ® Bluetooth function Compatible version Output ROM: Approx.
■ AC Adapter Input Output Charging temperature range Dimensions (W × H × D) Weight 100V - 240V AC 0.3A 50/60 Hz 5.0V DC 1.2A 5 ℃ to 35 ℃ AC adapter main unit: Approx. 71 × 30 × 45 mm Cable length: Approx. 1.2 m (except for connector insertion plug) Approx. 90g ■ Digitizer Pen Dimensions Weight Length: Approx. 141.3 mm Diameter: Approx. 10.5 to 13.5 mm Approx.
The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model wireless tablet personal computer with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model wireless tablet personal computer is on file with the FCC and can be found under the Display Grant section of (http://www.fcc.
ISED Canada This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. ● This Class B device complies with Canadian ICES-003.
Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel.
Safety Information To prevent possible hearing damage, do not listen at high volume levels for long periods. Product Disposal Battery: This product is a unibody (one-piece) device, so the back cover and battery cannot be removed. Please be careful. Observe the following precautions. • Do not attempt to open the back cover. • Do not take out the battery, replace it, or dismantle it. • Do not damage the back cover of the product.
Intellectual Property Rights Trademarks Company names and product names referred to in this manual are trademarks or registered trademarks of the respective companies.
License Users of the product are authorized to use software installed into the product described in this instruction manual. Pay attention to the following points when using the software. (a) The software installed on this product or part of it may not be altered, delivered, modified, analyzed, reverse-engineered, derived, and any such actions are prohibited. (b) Illegally importing the software or a part of it is prohibited.
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
For inquiries, call: ・Any inquiries such as the product, operation procedure, or repair, contact our support center below. When asking for repair For repair, prepare the warranty included with the product and contact our support center below. Support Center 0120-XXX-XXX From some IP phones (Call charges must be paid by the customers) 0X-XXXX-XXXX Business hours: 10:00 to 20:00 * Except for our special holiday (December 31st, January 1st). * Not available from overseas.
