Setup guide

Preparations
8 SETUP GUIDE
2
Connect the machine to the PC or your network device. When using the network
interface, remove the cap. These cables are sold separately.
Available Standard Interfaces:
3
Connect the power cord to the machine and
the other end into a power outlet.
4
Turn the power switch on (|). The machine
begins to warm up. The machine will begin
replenishing the toner; this will take
approximately 15 minutes.
Once the toner has been replenished,
Ready to copy will appear on the
message display.
Interface Function Necessary Cable
Network
Interface
Printer/Scanner/
Network FAX
LAN (10Base-T or 100Base-TX, Shielded)
USB Interface Printer/TWAIN/
WIA
USB2.0 compatible cable (Hi-Speed USB
compliant, Max. 5.0 m, Shielded)