Specifications

Maintenance
9-6 OPERATION GUIDE
IMPORTANT: Take care not to place your
fingers between the scan unit and the main
body when the scan unit is closed.
Cleaning the Machine
CAUTION: For safety purposes, always remove the power cord from the outlet
when performing cleaning.
Always use a soft cloth dampened with alcohol or mild detergent to clean the
machine.
Open the Document Processor and wipe
the gray portion, as shown in the illustration.
If copies appear soiled while using the
document processor the slit glass is dirty.
Cleaning the Document Processor
From time to time the document processor pad and feeding rollers may become
contaminated with ink, toner particles, or paper dust. In this case, documents may
not feed smoothly. If this occurs, follow the cleaning procedure describe below.
1
Open the Left Cover.
2
Wipe the Feeding Roller by moving the
swab from side to side. Rotate the roller
forward with your finger and repeat the
above cleaning procedure until the rollers
are clean. Be careful not to snag or damage
the Pick Spring.
Pick spring
Feeding roller