Specifications

OPERATION GUIDE 7-1

7 Using QLINK

The QLINK is a software utility that allows you to quite easily, with very few mouse

clicks, access the most frequently used scanning applications. Using the QLINK

eliminates the need to manually launch the specific applications and allows you to

scan a document directly to a folder on your computer. The QLINK provides three

categories of operations, as shown below:

1 MFP Button Setting Eection - Configure [Scan To PC] on the operation

panel.

2 Copy Function Section- Enhanced copy functions, such as Four/Two or One-

on-One Copying.

3 Scan Function Section - Scan directly to a file, or email. User-defined buttons

allow you to configure a button to meet your own application requirements.

Two of the three sections in the above QLINK figure have a number of different

buttons which are predefined for the most frequently used applications. The Scan

Function section contains one button for Scan to file, one button for Scan to email,

and three user-defined buttons with which you can assign your desired application.

The Copy Function section contains three buttons for 4 to 1 copying. The MFP button

setting section contains a big button, called Scan to, which allows you to configure

[Scan To PC] on the operation panel.

To Start the QLINK

Double-click , and then click the small QLINK icon located in the status area and

the QLINK appears.